Copyright (c) 1985-2006 Synopsys, Inc.  Rights reserved under the
copyright laws of the United States of America.

Copyright 1991-1998 by Bell Labs Innovations for Lucent Technologies.
Lucent Technologies disclaims all warranties with regard to this software,
including all implied warranties of merchantability and fitness.  In no
event shall Lucent Technologies be liable for any special, indirect or
consequential damages or any damages whatsoever resulting from loss of use,
data or profits, whether in an action of contract, negligence or other
tortuous action, arising out of or in connection with the use or performance
of this software.

Copyright (c) 1988-1989 Berkeley EDIF Software, Wendell C. Baker, and
Prof. A. Richard Newton.  All rights reserved.

This software is made available AS IS, and neither the Electronics Research
Laboratory or the University of California make any warranty about the
software, its performance or its conformity to any specification.

                   RESTRICTED RIGHTS LEGEND

Use, duplication, or disclosure by the U.S. Government is subject to
restrictions as set forth in Subparagraph (c)(1)(ii) of the Rights in
Technical Data and Computer Software clause at DFARS 252.227-7013,
FAR 52.227-14(g), or FAR 52.227-(19), as applicable.

                        Synopsys, Inc.
                   700 East Middlefield Rd.
                   Mountain View, CA 94043

U.S. Patent Nos. 4,868,770 (Canadian Patent No. 1,323,930); 4,985,860
(Canadian Patent No. 1,319,989); 5,046,024; 5,199,103; 5,404,319;
5,548,539; 6,532,569; 6,975,972. Other foreign patents pending.

Synopsys and MAST are registered trademarks of Synopsys, Inc.
CosmosScope and True-Hspice are trademarks of Synopsys, Inc.
SABER is a registered trademark of SabreMark Limited Partnership
and is used under license.  Other company and product names
may be trademarks or service marks of others and should be
treated as such.

Saber 2007.03-5.10 Build 27 on 20-Feb-2007 Copyright 1985-2006 Synopsys, Inc.
MAST 2007.03-3.7 Build 27 on 20-Feb-2007 Copyright 1985-2006 Synopsys, Inc.
Library 2007.03-5.5 Build 27 on 20-Feb-2007 Copyright 1985-2006 Synopsys, Inc.

     Searching for licenses ...
SABER_SIMULATOR:                 license.
Template info_types
Template diode_info
Template dsp
Template mur1560
Template spmtype
Function spmparam
Function spmiq
Function spmdiode
Function spmnoise
Template spm
Template spd
Template spr
Template spf
Template spv
Template spe
Template spc
Template ixfh32n50_sl
Template v_dc
Template cmp3inptype
Template electric_enums
Template cmp3type
Template cmp_info
Template pwli
Template cmp3inp
Template cmp3mid
Template cmp3out
Template cmp3strb
Template cmp3
Template lm339_3
Template q_3p
Template srctype
Template vgen
Template vtri
Template PFC2
Loading dynamic libraries...
saber
Host lenovo-pc, Intel Pentium III running Windows NT 5.1 Ver. 2600 Service Pack 3
Wed Aug 11 22:32 2010
aim
dc (calibrate yes,pins all,siglist /...
Calibration: Increasing density to 2.
Calibration: Increasing density to 4.
Calibration: Increasing density to 8.
Calibration: Increasing density to 16.
Calibration: Increasing density to 32.
Calibration: Increasing density to 64.
Calibration Done. Optimal density: 64.
execution time= 0.0312 sec.
tr (pins all,siglist /...,tend 100u,tstep 1u
*** ERROR "ALG_NO_SOLUTION" *** Cannot find nonlinear system solution.
*** ERROR "ALG_ITERATIONS" *** Too many iterations
Partial results at time=49u were written to the initial point "tr".
execution time= 0.219 sec.
messages given: 2 errors
dc (calibrate yes,pins all,siglist /...
Calibration: Increasing density to 2.
Calibration: Increasing density to 4.
Calibration: Increasing density to 8.
Calibration: Increasing density to 16.
Calibration: Increasing density to 32.
Calibration: Increasing density to 64.
Calibration Done. Optimal density: 64.
execution time= 0.0156 sec.
tr (pins all,siglist /...,tend 100u,tstep 1u
*** ERROR "ALG_NO_SOLUTION" *** Cannot find nonlinear system solution.
*** ERROR "ALG_ITERATIONS" *** Too many iterations
Partial results at time=49u were written to the initial point "tr".
execution time= 0.172 sec.
messages given: 2 errors
dc (calibrate yes,pins all,siglist /...
Calibration: Increasing density to 2.
Calibration: Increasing density to 4.
Calibration: Increasing density to 8.
Calibration: Increasing density to 16.
Calibration: Increasing density to 32.
Calibration: Increasing density to 64.
Calibration Done. Optimal density: 64.
execution time= 0.0156 sec.
dt (pins all,siglist /...,sweep /v_dc.v_dc2,swrange from 1 to 200 by 10
*** WARNING "ALG_NO_DT_MM" *** The DC Transfer analysis operates only on the
analog  part of mixed-mode systems; there is no interaction with the digital
part.
execution time= 0.0469 sec.
messages given: 1 warning
dc (calibrate yes,pins all,siglist /...
Calibration: Increasing density to 2.
Calibration: Increasing density to 4.
Calibration: Increasing density to 8.
Calibration: Increasing density to 16.
Calibration: Increasing density to 32.
Calibration: Increasing density to 64.
Calibration Done. Optimal density: 64.
execution time= 0.0156 sec.
dt (pins all,siglist /...,sweep /v_dc.v_dc2,swrange from 1 to 200 by 10
*** WARNING "ALG_NO_DT_MM" *** The DC Transfer analysis operates only on the
analog  part of mixed-mode systems; there is no interaction with the digital
part.
execution time= 0.0469 sec.
messages given: 1 warning
dc (calibrate yes,pins all,siglist /...
Calibration: Increasing density to 2.
Calibration: Increasing density to 4.
Calibration: Increasing density to 8.
Calibration: Increasing density to 16.
Calibration: Increasing density to 32.
Calibration: Increasing density to 64.
Calibration Done. Optimal density: 64.
execution time= 0.0156 sec.
tr (pins all,siglist /...,tend 100u,tstep 1u
*** ERROR "ALG_NO_SOLUTION" *** Cannot find nonlinear system solution.
*** ERROR "ALG_ITERATIONS" *** Too many iterations
Partial results at time=49u were written to the initial point "tr".
execution time= 0.172 sec.
messages given: 2 errors
dc (calibrate yes,pins all,siglist /...
Calibration: Increasing density to 2.
Calibration: Increasing density to 4.
Calibration: Increasing density to 8.
Calibration: Increasing density to 16.
Calibration: Increasing density to 32.
Calibration: Increasing density to 64.
Calibration Done. Optimal density: 64.
execution time= 0.0156 sec.
tr (pins all,siglist /...,tend 100u,tstep 1u
*** ERROR "ALG_NO_SOLUTION" *** Cannot find nonlinear system solution.
*** ERROR "ALG_ITERATIONS" *** Too many iterations
Partial results at time=49u were written to the initial point "tr".
execution time= 0.172 sec.
messages given: 2 errors
pl (plaction openonly
Opening connection to Cosmos Scope...
Loading plotfile(s) into  Cosmos Scope...
execution time= 0.0156 sec.
dc (calibrate yes,pins all,siglist /...
Calibration: Increasing density to 2.
Calibration: Increasing density to 4.
Calibration: Increasing density to 8.
Calibration: Increasing density to 16.
Calibration: Increasing density to 32.
Calibration: Increasing density to 64.
Calibration Done. Optimal density: 64.
execution time= 0.0156 sec.
tr (pins all,siglist /...,tend 100u,tstep 1u
*** ERROR "ALG_NO_SOLUTION" *** Cannot find nonlinear system solution.
*** ERROR "ALG_ITERATIONS" *** Too many iterations
Partial results at time=49u were written to the initial point "tr".
execution time= 0.187 sec.
messages given: 2 errors
dc (calibrate yes,pins all,siglist /...
Calibration: Increasing density to 2.
Calibration: Increasing density to 4.
Calibration: Increasing density to 8.
Calibration: Increasing density to 16.
Calibration: Increasing density to 32.
Calibration: Increasing density to 64.
Calibration Done. Optimal density: 64.
execution time= 0.0312 sec.
tr (pins all,siglist /...,tend 100u,tstep 1u
*** ERROR "ALG_NO_SOLUTION" *** Cannot find nonlinear system solution.
*** ERROR "ALG_ITERATIONS" *** Too many iterations
Partial results at time=49u were written to the initial point "tr".
execution time= 0.187 sec.
messages given: 2 errors
quit
PFC2: total CPU execution time= 1.98 sec.

